News

Home / News / How To Self-adhesive Wallpaper With A Wooden Handle Brush?

How To Self-adhesive Wallpaper With A Wooden Handle Brush?

In recent years, everyone has begun to like ecological decoration, because they don't want to cause unnecessary harm to their families because of the decoration. For this reason, self-adhesive walls are starting to find their way into homes. It respects the environment, is economical, convenient, safe, and embodies many benefits. But you need a tool for wallpapering yourself, that is a wooden handle brush. Do you know how to apply wallpaper with a wooden handle brush?

Step 1: Fill the recessed part of the wall with cement slurry on the wall.

Step 2: Measure the size of the wall, and then measure the wallpaper according to the area of the wall. Pay attention to the length of the wallpaper, which is 5 cm longer than the actual surface.

Step 3: Add powdered wallpaper glue powder to the water to adjust to a ratio of 1:3; the ratio of foam wallpaper is 1:2, or use a special adhesive for wallpaper that does not need to be prepared.

Step 4: Then spread the wallpaper on the wall, and use a wooden brush to paste it from top to bottom and from outside to inside to level the wallpaper.

Step 5: When you touch the switch or socket, first cover the wallpaper, then brush with a wooden handle, then use a knife to draw a horizontal line on the diagonal, and use a scraper to press the edge of the switch. Cut off the extra with a knife.

Step 6: If the printed wallpaper is connected, find a consistent pattern position at the junction of the two wallpapers, and overlap the adhesive about 12 cm wide. Once all the wallpaper is aligned, use the scraper to hold down, then use the blade to cut the overlap.

Step Seven: When placing the wallpaper, please pay attention to the stickers from top to bottom. If you find that the floating adhesive is uneven, you can wipe it with a towel, and then use the scraper to smooth them out again.

Step 8: Finally try the wallpaper around the doors and windows, which is the same as the method of laying wallpaper on the switch.

Step 9: After pasting the wallpaper, put the whole original equipment into your own decorative box.

Hangzhou Zhanqi Brush Industry Co., Ltd. is a professional Handle Brush Manufacturers. If you need it, you can click the official website to contact us. We are willing to provide you with more product information.

Hot Products

Contact Us

*We respect your confidentiality and all information are protected.