Definition Of Wire Brush

Steel wire brush is a kind of brush that selects the corresponding type of steel wire for different purposes and chooses different wire diameters. There are two kinds of steel wires: straight wire and corrugated wire. The thickness of the wire can be determined according to different needs. Both straight and curved.

There are many brushes suitable for drilling and hair planting with straight wires, such as wood wire brushes, wooden handle wire brushes, disc wire brushes, etc.; while the application range of curved wires is basically applicable to all types of wire brushes, especially spring wire brushes. The roller must be curved wire. If straight wire is used, it is impossible for the steel wire to be standardized and neat after being folded in half. However, due to its own curvature, the curved wire can be relatively matched with the nearby brush wire during production, so that the folded steel wire is not symmetrical. , The inclination is slightly biased, and it cannot be seen, and the steel wire on the surface of the brush roller formed in this way is more dense, strong, and strong in derusting and rebounding.

Disc wire brushes, plank wire brushes, wooden handle wire brushes, wire brush wheels, wire brush rollers, wire strip brushes, wire pipe brushes, spring wire brushes, etc.

Steel wire brushes, especially steel wire brush rollers, are usually used in steel or aluminum surface treatment plants. A series of stainless steel wire brush rollers are installed on a fully automatic high-speed brush polishing machine (brush polishing machine). The wire brush roller rotates at a high speed to remove the scale on the upper and lower surfaces of the strip in the opposite direction to the movement of the rolled piece. The iron oxide scale brushed off is washed away by a closed circulation cooling water flushing system. Generally, the used thickness of coiled wire is 1.09-6.35mm, and the renewal cycle of steel wire brushes is once every 20,000 tons of thin plates or 40,000 tons of steel coils produced.

The stainless steel ultra-fine elastic wire brush is specially used to clean the ceramic anilox roller. This is because the hardness of the ceramic is much greater than that of the steel wire, and the wire brush will not damage the ceramic layer on the anilox roller surface. Ultra-fine elastic copper wire brush is a common and necessary cleaning tool for cleaning chrome-plated metal anilox rollers and gravure printing rollers, and the effect of using cleaning agents is better.

Commonly used specifications are 6*14 or 5*14 holes, and the wire material is 304 stainless steel wire or ordinary steel wire. Each hole is usually implanted with 5 roots folded in half, and the length of the steel wire is about 20mm. Brushes made of ordinary steel wire are easy to rust and are not durable. Compared with 304 stainless steel wire brushes with wooden handles, the quality is much different.

Steel wire pipe brushes are generally used in industrial pipes, mechanical screw hole cleaning and rust removal, polishing and cleaning. The pipe brush process uses steel wire or stainless steel wire sandwiched between two or four strands of iron wire and mechanically twisted.

Hangzhou Zhanqi Brush Industry Co., Ltd. is a professional Industrial Scrub Brush Factory. If you need it, you can click the official website to contact us. We are willing to answer more information for you.